Today I mostly .....

excossack · Post by **excossack** » Sat Jan 01, 2011 6:23 pm

It certainly is high. U switch estimate i can save £270 a year!

Neil Chowney · Post by **Neil Chowney** » Sat Jan 01, 2011 9:35 pm

Ha! It's A 1.6!
and I couldn't find the problem.....

excossack · Post by **excossack** » Sun Jan 02, 2011 7:54 pm

Today visited some friends and went out for dinner.
Got to drive their 2005 Range Rover Vogue

and ate too many scones with cream and jam!

excossack · Post by **excossack** » Sun Jan 02, 2011 11:13 pm

Sorry about the teasing. Its all true, and very nice they were !!!

jiffyman · Post by **jiffyman** » Mon Jan 03, 2011 3:26 pm

just got up..... a wasted day, but i didn't realise it was a Bank Holiday until last night....... ALL GOOD!!!

excossack · Post by **excossack** » Mon Jan 03, 2011 7:14 pm

Today I dug out the welder ready for when my mate come over from Spain to collect the rest of his stuff as i have some seat brackets to make for his Discovery so Range Rover Classic seats can be fitted instead.

Sorted out the house insurance and saved £200 on the renewal price

and made even more of a saving as we get £45 cash back!

excossack · Post by **excossack** » Mon Jan 03, 2011 9:14 pm

Thats looking good. Needs some big Cibie Oscars on the front now!

excossack · Post by **excossack** » Tue Jan 04, 2011 9:31 pm

1st day back in work since finishing at Christmas eve

iwanna · Post by **iwanna** » Tue Jan 04, 2011 10:08 pm

Removed the heater to find various bits broken and missing.

Things like all the screws and bolts bar one are missing, only 2 spring clamps are on the heater and the vents at the top, the housing is broken.

excossack · Post by **excossack** » Thu Jan 06, 2011 8:50 pm

Today I spent most of the day recovering data off a mates HD. Decided to take it to work so I can leave it running, I started it at 8am, it was still going at 16:40 when i left. Ended up with 3 external HD's plugged in and spent some time re-arranging data of the drives to make room for the recovery.

daniel.b · Post by **daniel.b** » Fri Jan 07, 2011 8:29 am

Bought a new-to-me engine for the Combo

Zelandeth · Post by **Zelandeth** » Fri Jan 07, 2011 11:58 pm

Finally got around to arguing with it enough that I got the CISS on my printer to actually behave itself. I'd previously been having a lot of trouble with ink running back from the heads to the reservoir causing air locks. Problem appeared to be the filters on the air vents for the tanks not acting so much as vents, but as plugs. Couple of tiny holes poked in the filter membrane with a pin and normality has been restored.

Fingers crossed it stays that way!

excossack · Post by **excossack** » Sat Jan 08, 2011 8:58 pm

Today I mostly spent the day helping a mate remove an engine from a crash damaged Mitsi L200. Got the engine out after removing (read chopping) the front slam panel off, bent radiator, twisted oilcooler, damage aircon rad and pipe work.

excossack · Post by **excossack** » Sun Jan 09, 2011 3:14 pm

Feeling a little delicate are we Simon ?
AS long as it was a good one thats the main thing!

iwanna · Post by **iwanna** » Sun Jan 09, 2011 4:51 pm

Got the musso washed for sale (need a van) and started to remove the bodykit and found it needs welding.